| About us | Products | Contact us |
materials for optical fiber cable production
10.10.2024
09.10.2024
USD ЦБ
96.1079
0.84
96.9483
EUR ЦБ
105.6891
0.73
106.4175
EUR/USD
1.0977
-0.002
Aramid rods
Aramid Rod is a Fine Diameter Aramid Rods have been specially developed for the up-coming Fiber to the home (FTTH/FTTP) cables, where very fine diameter rods with very low bend radius and good adhesion to the jacket is required. These are used as peripheral reinforcement embedded in a PE/PVC jacket. These rods are suitable for aerial and micro-duct cables.
Key features:
- an excellent adhesion of rods to jacket materials facilitates maximum transfer of load to the rod and hence protecting the fiber;
- cables manufactured with aramid rod have very small diameter, light weight and good bending properties to facilitate installation even in very small bends;
- supplied with Megabond or Hard coatings
- long continuous lengths with very close diameter tolerance;
- available in diameter ranging from 0.30 mm to 1.0 mm.
ООО «2М»
Phone./Fax: +7 812 441 39 74
Phone./Fax: +7 812 441 39 74